Platinum is having very good Physical and Chemical properties such as high corrosion resistance, good Thermal Conductivity and very good Catalytic nature. But this is an expensive  material and cannot be used in its solid form as an Anode. Because of high cost as in solid form, so by Electroplating process a thin layer of Platinum over a high corrosion resistance substrate. Titanium, Tantalum and Niobium are having very good Mechanical stability and uniform current distribution property.

So by coating Platinum on a specially treated Titanium, Tantalum and Niobium substrate by means of Electrodeposition (Plating) process. Our (TTCl) manufactured Platinized and Niobium Anodes that are economical and retain the superior Physical and Chemical properties of Platinum.

Our (TTC1) product range of Anodes is available in Sheet, Mesh, Plate, Wire, Rod, Tube and as per customer design and request.

Platinum Coating thickness - Minimum 0.5micron thickness
                                             - Maximum 20.0micron thickness

Specification


Platinized Titanium Anode

PLATINIZED TITANIUM PLATE ANODE
PLATINIZED TITANIUM MESH ANODE
PLATINIZED TITANIUM TUBULR ANODE
PLATINIZED TITANIUM WIRE & ROD ANODE
PLATINIZED ITTANIUM DISK & STRIP ANODE

Platinized Titanium Anode is an absolutely vital element for wet electro deposition of precious metals like Gold, Rhodium, Platinum, Palladium and nonferrous metals like Chromium, Nickel, Copper and Zinc. The pH level is 1.0-11.0,allowable Fluoride content is Maximum 50mg/l and allowable current is 5OA/dm2. We offer Platinized Titanium Anodes in any size in the maximum of 1.2 sq.mtr.(1.2 metre X 1.2 metre) in single piece. Titanium plate, mesh, wire, rod and Niobium, Tantalum can also be platinized for various applications. We can do the coating thickness from 0.5 micron to 20.0 micron as per customer application and request.

Platinized Niobium Anode PLATINIZED NIOBIUM SHEET and PLATE ANODE PLATINIZED NIOBIUM MESH ANODE PLATINIZED NIOBIUM TUBULR ANODE PLATINIZED NIOBIUM WIRE & ROD ANODE PLATINIZED NIOBIUM STRIP ANODE

Since the Niobium substrate is resistant to corrosion, the anode remains dimensionally stable over its operating life and consumption of the Platinum costing is extremely low (40 to 80 mg / amp yr.). Because of its low Consumption rate, the Anodes may be employed in a protection system to achieve a design life of 6years and above. The pH level is 1.0-10.0, allowable fluride content is Miniumum 100mg/l and allowable current is 100A/dm2. The Anodes in also very light weight, flexible and strong. Platinized Niobium Anodes are designed for use in all types of aqueous storage and process equipment. The anode has proven to operate effectively in fresh, brackish and salt water and is not adversely affected by Chloride concentration.

Application :

Electroplating, Cathodic protection, Electrodialysis, Electrowinning process, Electrolytic production of Sodium Hypochlorite, Saltwater application, Water treatment.

Quality:

We are Manufacturing the Anodes as per customer request and are in standard sizes. The production of our Anodes process are to make sure the spectfication are will be covered the code of ASME, ASTM, DIN, BS, as per ISO 9000, etc,.